Dumpster Vacuum 200cfm Wet/Dry for spill control, sump recovery, coolant recovery, oils, sludge dusts, powders, sand, abrasive media and all dry waste.

The standard tank is 200 litres.

click on check box at checkout

The Dumpster Vac is a high powered industrial vacuum that is built from mild steel and comes in either 200 litres or 400 litre models. When attached to compressed air it turns the steel tank into an ultra high powered vacuum capable of delivering 3 times the suction power of an ordinary electric vacuum.

The range starts with the 100 cfm unit that is designed for oils, sludge, chemicals, fuels, general spills, water and slurry. Using 100 cfm of compressed air this model is an explosion proof model with reverse pump out. The 200 cfm unit is a standard wet and dry model for general factory cleaning. Capable of vacuuming spills and dry waste like garnet and general dry factory waste.

The top of the range is the 180 cfm explosion proof reverse pump out version powered by twin venturis and incorporating a design that releases pressure through the venturi sleeve to prevent any over pressurisation during reverse pump out.

All drum vac lids come with the following standard inclusions;

• High quality powder coated 2mm steel shroud
• Automatic shut off float valve and filter cartridge
• 3 metres of hose
• Front ball valve for pump out
• Wand and squeegee
• 3mm mild steel tank
• Ball valve
• Reverse ball valve (RPO models only) 
• Anti static earth strap (EX models only)
• Instruction sheet

Applications;

• fdry factory waste like sand and garnet
• coolant
• spills
• water
• mud
• chemicals
• bilge
• solids suspended in fluid
• oils
• sludge
• chips
• soil, rocks, gravel
• nuts and metal filings