Drum Lid Vacuums - vacuum pump. All industrial spill and wet waste

Drum Lid Vac is a high powered industrial vacuum that comes on a standard steel drum lid. When attached to the drum and then compressed air it turns the drum into an ultra high powered vacuum capable of delivering 3 times the suction power of an ordinary electric vacuum.

The range starts with the 28 cfm unit that is designed for coolant, sump oils, sludge, general spill, water and slurry. using only 28 cfm of compressed air this model is a cheap entry into the power of the drum lid vacuums.

The top of the range is the 180 cfm explosion proof reverse pump out version powered by twin venturis and incorporating a design that releases pressure through the venturi sleeve to prevent any over pressurisation during reverse pump out.

RDLV EX HEAD400

 

16 models to choose from;

The first 4 are the basic units using 28 cfm of compressed air. Great for coolant, sumps, water and basic pump outs.

 The following unit needs 48 cfm of comperessed air and will have a much faster pick up rate than the 28cfm. If you have more available compressed air than the basic 28 cfm then consider this unit or the ultra high powered twin venturi models.

 Both the 100 and 180 cfm units are powered by twin venturis which bring a whole new dimension to spill control. The dual power delivers high vacuum and high air flow for ultra fast pick up and under the hood grunt.

DLVR rear view Vacuum600

When compressed air is not an issue the 180 cfm unit is the big daddy and delivers impressive performance. Massive suction and massive air flow. 30+ metre suction hoses using 50mm is possible.